Led Signals

DEV 3Kv: blue point end indicatori in 3Kv areas

BLUE POINT END INDICATOR IN 3KV AREAS

DEV

Segnali LED: DEV, segnale blu per deviatoio in ambiente 3kV

Can be easily identified even in areas with a large number of point machines. The signal is installed next to each remotely controlled point machine, providing the driver of a train with information about the correct position of the points along a route during degraded mode of operation. When the signal is lit the driver does not have to stop the train and control the correct position of the points.

The use and characteristics of the blue signal for 3kV areas are prescribed by article .69 section D of the Signalling Code. This blue signal has not flashing aspect.

Signal power supply voltage 127.5Vac ÷ 165Vac
Nominal voltage on the signal 150Vac/50Hz
Nominal power 1.5VA
Dielectric strength > 2000V, 50Hz
Isolation resistance > 10 Mohm
Working temperature -25 ÷ 70 °C
Signal sizes 800 (width) x 330 (lun) x 240 (h) mm
Weight of the complete signal 4.2kg
MTBF > 300.000 h
Colour emitted Dominant wavelength:
minimum=465nm; maximum=475nm.
Light intensity on the axis 12cd ÷ 24cd